Ciscomotors C-Max Bedienungsanleitung PDF herunterladen (Seite 12)

Page 12

6. ASSEMBLY/DISASSEMBLY STARTER

Figure 18

1. Remove 4 screws (Fig.18)

2. Remove the screw (Fig.20) for to arrive

to the pulley

3. Remove the pulley (Fig.21)

4. Control the screws (Fig.19) are in a good

conditions and locked.

1. Install the pulley and tighten the screw

(pict. 20) to the specified torque

TORQUE : 15Nm( 1,5 kgf/m)

2. Insert the starter in 4 screws (Fig.19)

3. Tighten the screws (Fig.18) to the

specific torque using light locking agent

TORQUE: 12Nm (1.2 kgf/m)

Figure 19

Figure 20

Figure 21

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Ciscomotors C-Max Bedienungsanleitung Seite 12